Crawler FW225 to inspect pipe systems from 225 mm to approx. 800 mm, страница 2

Side View with SK80 / Lift range

The lift range is 156 mm. With the electrical camera lift the camera can be positioned almost in the middle of an 800 mm pipe. Therefore the camera picture is recorded in the best way possible. 

With a special pendant controller the lift can be positioned exactly. A clutch is integrated in the drive allowing the lift to be positioned by hand if necessary. The lift also collapses to its retracted home position if the crawler tips over, thus avoiding damage.

Crawler Front View in Pipe 225 mm

Inside view in pipe with a nominal size 225 mm with Pan & Tilt camera SK80 and standard-wheel-set (D110  -  auxiliary light removed).The deviation of the camera point from the middle of the pipe is only 5,6 mm, getting the camera images from a optimum recording position.

Crawler Front View in Pipe 250 mm

Inside view in pipe with a nominal size 250 with Pan & Tilt camera SK80 and standard-wheel-set (D110  -  with auxiliary light): The deviation of the camera point from the middle of the pipe is only 8,9 mm, getting the camera images from a optimum recording position.

Crawler Front View in Pipe 300 mm

Inside view in pipe with a nominal size 300 mm with Pan & Tilt camera SK80 and additional-wheel-set No. 1 (D135). With the wheel axle extenders the camera can be positioned exactly in the middle of the pipe, getting the camera images from a optimum recording position.

Crawler Front View in Pipe 400 mm

Inside view in pipe with a nominal size 400 mm with Pan & Tilt camera SK80 and additional-wheel-set Nr. 2 (D220 “Balloon”). Therefore getting the camera images from a optimum recording position.

Crawler Front View in Pipe 800 mm

Inside view in pipe with a nominal size 800 with Pan & Tilt camera SK80 and additional-wheel-set Nr. 2 (D220 “Balloon”). With the wheel axle extenders the camera can be positioned almost in the middle of the pipe, getting the camera images from a optimum recording position.